eb15k5 series ? crystal clock oscillators ? lvcmos output ? +2.5v supply voltage ? tri-state output function ? 4 pad ceramic smd package ? low stand-by current ? rohs compliant (pb-free) oscillator eb15k5 notes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. manufacturer category series package voltage class rev . date ecliptek corp. oscillator eb15k5 ceramic 2.5v os7e 08/09 electrical specifications inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration 20% to 80% of waveform at 50% of waveform v ih : 90% of v dd or no connection v ih : < 10% of v dd disabled output: high impedance frequency range operating temperature range storage temperature range supply voltage (v dd ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time load drive capability duty cycle tri-state input voltage standby current aging (at 25c) start up time 32.768khz 0c to +70c or -40c to +85c -55c to +125c 2.5v dc 5% 600a maximum 100ppm maximum 50ppm maximum 25ppm maximum 20ppm maximum 90% of v dd minimum i oh = -2ma 10% of v dd maximum i ol = +2ma 0.5seconds maximum 15pf maximum 50 5(%) enables output disables output: high impedance 10a maximum 5ppm / year maximum 10mseconds maximum h 1.3 l 5.0 w 3.2
manufacturer category series package voltage class rev . date ecliptek corp. oscillator eb15k5 ceramic 2.5v os7e 08/09 eb15k5 f 2 h - 32.768k tr frequency tolerance / stability c = 100ppm maximum over 0c to +70c d = 50ppm maximum over 0c to +70c e = 25ppm maximum over 0c to +70c f = 20ppm maximum over 0c to +70c g = 100ppm maximum over -40c to +85c h = 50ppm maximum over -40c to +85c j = 25ppm maximum over -40c to +85c duty cycle 2 = 50 5(%) part numbering guide *compliant to eia 481a mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters tape and reel dimensions all dimensions in millimeters tolerances= + 0.1 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. 3.20 0.20 5.00 0.20 2.54 0.15 1.3 max 1.00 0.20 (x4) 2.20 0.15 1.20 0.20 1.20 0.20 (x4) marking orientation 4 3 1 2 pin 1: tri-state pin 2: case ground pin 3: output pin 4: supply voltage available options blank = bulk tr = tape & reel frequency output control function h = tri-state (high impedance) m n o p q 1.5 min 50 min 20.2 min 13.0 0.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4 +2 -0 1,000 reel a b c d e f 16.0 0.3 7.5 0.1 6.75 0.1 4.0 0.1 2.0 0.1 f g h j k l 8.0 0.1 b0* 1.5 +0.1 - 0.0 a0* 0.30 0.01 k0* reel characteristic specification esd susceptibility mil-std-883, method 3015, class 1, hbm: 1500v fine leak test mil-std-883, method 1014, condition a flammability ul94-v0 gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-883, method 2002, condition b moisture resistance mil-std-883, method 1004 moisture sensitivity j-std-020, msl 1 resistance to soldering heat mil-std-202, method 210, condition k resistance to solvents mil-std-202, method 215 solderability mil-std-883, method 2003 temperature cycling mil-std-883, method 1010, condition b vibration mil-std-883, method 2007, condition a line 1: exx.xxx frequency in khz (5 digits maximum + decimal) line 2: xxxxx eclipitek manufacturing identifier
|